MOTScout

Reliability evidence from 2023 official MOT data

Hyundai I40 Reliability, Common Problems & MOT Faults

Looking for Hyundai I40 common faults or reliability evidence? This guide analyses 22,289 normal initial class 4 MOT tests, showing the problem areas recorded most often and how outcomes change with age and mileage.

Is the Hyundai I40 reliable?

In the matched 2023 sample, 72.7% passed as presented. After adjusting for the age mix of vehicles tested, that result was broadly in line with the age-matched all-model baseline. The tables below show which MOT fault categories recur most often, rather than relying on owner anecdotes or a single headline score.

This is evidence about roadworthiness items inspected at MOT. It does not measure every engine, gearbox, infotainment or intermittent fault, so use it as one part of a used-car reliability check rather than a complete mechanical verdict.

22,289

initial tests

72.7%

passed as presented

77.4%

final pass incl. PRS

-0.4 pts

vs age-matched baseline

What happened at the initial test?

Passed without station rectification16,214 · 72.7%
Passed after rectification at station (PRS)1,036 · 4.6%
Recorded as failed5,039 · 22.6%

MOT pass rate by vehicle age

Compare each age band with its all-model baseline rather than comparing a three-year-old car with a fifteen-year-old one.

Swipe to see all columns →

Age at testTestsInitial passFinal passAll-model baseline
3–5 years1,66782%85.4%85.8%
6–9 years13,70175.9%80.5%76.6%
10–14 years6,92164.3%69.3%63.2%

MOT pass rate by recorded mileage

Mileage is the odometer reading recorded at the test. Invalid or implausibly high readings are excluded from this breakdown.

Swipe to see all columns →

Recorded mileageTestsInitial passFinal pass
Under 30,00064887.5%89.4%
30,000–59,9994,52381.4%84.3%
60,000–89,9997,25673.4%77.7%
90,000–119,9995,40767.9%73.5%
120,000+4,45166.5%72.8%

Fuel types in the MOT sample

Fuel is recorded for each tested vehicle. The mix helps explain which Hyundai I40 variants dominate this MOT sample.

Swipe to see all columns →

FuelInitial testsShare
Diesel21,98898.6%
Petrol3001.3%
Diesel hybrid10%

Common Hyundai I40 faults found at MOT

These are the problem categories most often recorded on tests that initially failed (F or PRS). One test can appear in several categories.

Brakes

31.6%

1,918 tests · of initial failures · 8.6 per 100 initial tests

Lamps and electrical equipment

28.8%

1,749 tests · of initial failures · 7.8 per 100 initial tests

Tyres

26.1%

1,583 tests · of initial failures · 7.1 per 100 initial tests

Steering

18.3%

1,111 tests · of initial failures · 5 per 100 initial tests

Suspension

17.9%

1,088 tests · of initial failures · 4.9 per 100 initial tests

Visibility

12.5%

757 tests · of initial failures · 3.4 per 100 initial tests

Noise, emissions and leaks

4.8%

294 tests · of initial failures · 1.3 per 100 initial tests

Body, chassis and structure

3.3%

199 tests · of initial failures · 0.9 per 100 initial tests

Common Hyundai I40 advisories and emerging problems

Advisory and minor items can reveal recurring wear before it becomes an MOT failure. Percentages use all matched initial tests.

Tyres

27.8%

6,192 tests · of all tests · 27.8 per 100 initial tests

Brakes

26.9%

6,006 tests · of all tests · 26.9 per 100 initial tests

Suspension

8.4%

1,877 tests · of all tests · 8.4 per 100 initial tests

Lamps and electrical equipment

5.4%

1,199 tests · of all tests · 5.4 per 100 initial tests

Steering

4.1%

915 tests · of all tests · 4.1 per 100 initial tests

Noise, emissions and leaks

3.9%

875 tests · of all tests · 3.9 per 100 initial tests

Visibility

3.2%

714 tests · of all tests · 3.2 per 100 initial tests

Vehicle identification

2.8%

622 tests · of all tests · 2.8 per 100 initial tests

Common Hyundai I40 problem areas to check

Start with the fault categories most often recorded for this model. This is a data-led pre-MOT and used-car checklist, not a substitute for a mechanical inspection.

Brakes

Treat warning lights, pulling, vibration or unusual pedal feel as reasons for a professional brake inspection.

Lamps and electrical equipment

Test every exterior lamp, indicator and warning light. Replace failed bulbs and investigate warning lights before the test.

Tyres

Check tread, visible damage, inflation and warning lights. Ask a tyre professional if wear is uneven or close to the legal limit.

Steering

Do not ignore knocks, uneven ride height, steering play or abnormal tyre wear; these need professional diagnosis.

Suspension

Do not ignore knocks, uneven ride height, steering play or abnormal tyre wear; these need professional diagnosis.

Visibility

Clean the windscreen and mirrors, top up washer fluid, and check the wipers clear the swept area without damage.

See the complete MOT inspection guide →

Licensed Hyundai I40 vehicles

DfT/DVLA licensing records for Great Britain at 2026 Q1. These are registration-stock figures, separate from the MOT sample.

17,777

licensed

1,382

SORN

Swipe to see all columns →

FuelLicensed vehiclesShare
Diesel17,53698.6%
Petrol2411.4%

Licensed stock trend

Swipe to see all columns →

QuarterLicensed vehicles
2026 Q117,777
2025 Q418,184
2025 Q318,516
2025 Q218,885
2025 Q119,268
2024 Q419,563
2024 Q319,788
2024 Q220,139
2024 Q120,387

Used-car checks that model averages cannot replace

  1. 1Check the registration's MOT historyLook for mileage changes, repeat advisories and whether defects were fixed at later tests.Open on MOTScout →
  2. 2Check outstanding safety recallsA model can be affected while an individual car has already had the repair.Open on MOTScout →
  3. 3Find the exact variant's fuel and CO₂ dataSearch certified VCA Euro 6 records by model, engine and gearbox.Open on MOTScout →
  4. 4Get an independent inspectionAn MOT certificate only covers testable items at the time of the test and is not a full mechanical inspection.

Plan the next MOT

Methodology and limitations

  • • Scope: Normal initial class 4 MOT tests in Great Britain matched to a DfT generic car model in 2023.
  • • Initial pass = P only. Initial failure = F or PRS. Final pass = P or PRS.
  • • Defect percentages count distinct tests with at least one item in a category, so categories do not add to 100%.
  • • Detailed trim and engine strings are consolidated using the DfT generic-model field; unmatched records are excluded.
  • • The dataset covers Great Britain. Northern Ireland has a separate MOT process.